409L / 1.4512 / SUH409L / 022Cr11Ti

Standard	C≤%	Mn≤%	P≤%	S≤%	Si≤%	Cr	Ni≤%	N	Others
ASTM A240	0.03	1.00	0.040	0.020	1.00	10.50-11.70		0.03	Ti:8X(C+N)min,Ti 0.15-0.50,Cb:0.10
JIS G 4312:2011	0.03	1.00	0.400	0.030	1.00	10.50-11.75	0.60		Ti 6XC%-0.75
GB/T3280-2015	0.03	1.00	0.040	0.020	1.00	10.50-11.75	0.03		Ti:0.15-0.50 & Ti≥8X(C+N),NbL0.10

Standard	T.S. min	Y.S. min		EL min%	HARDNESS( max)				BEND
Standard	Mpa	Mpa		50mm	HBW	HRB	HV		BEND
ASTM A240	380	170		20	179	88			180
JIS G 4312:2011	360	175		25	162	80	175		180
GB/T3280-2015	380	170		20	179	88	200		180

Cold rolled stainless steel coil & sheet					Hot rolled stainless steel coil & sheet
Thickness	1.0-3.0 mm				Thickness	3.0-10.0mm
Width	1219				Width	1219,1500
Length	coil or as per requirement.				Length	coil or as per requirement.
Surface	2B				Surface	No.1 1D 1U
Original	TISCO				Original	TISCO
Standard	JIS G 4312:2011				Standard	ASTM A240/A240M
MOQ for coil	5mt or as per coil actual weight				MOQ for coil	13mt or as per coil actual weight
MOQ for sheet	5 Pcs				MOQ for sheet	5 Pcs

Precision stainless steel strip
Thickness	0.08-1.2mm
Rolling width	450-680mm
Slitting width	5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients)
Length	coil or as per requirement.
Surface	2B
Original	DSM
Standard	Produce as per your requirement.
MOQ	3mt or as per coil actual weight