Home » Products » Stainless Steel Product » Cold Rolled Stainless Steel » Metal 1.4828 stainless steel coil for chemical plant

Metal 1.4828 stainless steel coil for chemical plant

EN 1.4828 is a heat resistant Cr-Ni-Si stainless steel with increased levels of Silicon as compared to type 309S. Its high chromium & nickel contents along with silicon provide superior resistance to oxidation & good strength at both room and elevated temperatures.

Availability:

Model:
1.4828
Brand:
DSM
EU:
1.4828
ASTM:
-
JIS:
-
GB:
X15CrNiSi20-12
APPLICATION:
Shipbuilding/Railways/Chemical plant

Product Description

The material of 1.4828 is X15CrNiSi2012 German DIN standard heat-resistant steel. 1.4828 is the material number of this heat-resistant steel, and the grade is X15CrNiSi2012.

Heat-resistant steel is commonly used in the manufacture of boilers, steam turbines, power machinery, industrial furnaces and parts that operate at high temperatures in industrial sectors such as aviation and petrochemicals. In addition to high-temperature strength and resistance to high-temperature oxidative corrosion, these parts also require sufficient toughness, good processability and weldability, and a certain degree of structural stability depending on their uses.

Standard	C≤%	Si≤%	Mn≤%	P≤%	S≤%	Cr	Ni≤%	N≤%
EN 10095-1999	0.2	1.50-2.50	2	0.045	0.015	19.00-21.00	11.00-13.00	0.11

Standard	T.S. min	Y.S. min	EL min%	HARDNESS( max)			BEND
Standard	Mpa	Mpa	50mm	HBW	HRB	HV	BEND
EN 10095-1999	550-750	----	----	223	----	----	----

Precision stainless steel strip
Thickness	0.08-0.5mm
Rolling width	450-680mm
Slitting width	5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients)
Length	coil or as per requirement.
Surface	2B
Original	DSM
Standard	Produce as per your requirement.
MOQ	3mt or as per coil actual weight