 |
|
| |
420 Stainless Steel Plate
DSM
1.4021
420
SUS420J1
2Cr13
In the quenched state, the hardness is high and the corrosion resistance is good. for steam turbine blades
420 Stainless Steel Specification
| Cold rolled stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Width | 1000mm,1219mm |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | TISCO |
| Standard | GB/T3280-2007 JIS G4305 |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Hot rolled stainless steel coil & sheet | |
| Thickness | 3.0-10.0mm |
| Width | 1219mm |
| Length | coil or as per requirement |
| Surface | No.1,1D |
| Original | TISCO |
| Standard | GB/T4237-2015 JIS G4304 |
| MOQ for coil | 13mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Precision stainless steel strip | |
| Thickness | 0.08-1.2mm |
| Rolling width | 450-680mm |
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | DSM |
| Standard | Produce as per your requirement |
| MOQ | 3mt or as per coil actual weight |
| Re-rolling stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Rolling width | 550-680mm |
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | as per requirement |
| Surface | 2B |
| Standard | Produce as per your requirement |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
Hardness of 420 Stainless Steel
The 420 grade, which contains 12%-14%chrome, is ductile when annealed but can be hardened up to Rockwell Hardness 50HRC. This is the highest Rockwell Hardness of any of the grades. Hardening and polishing can achieve the best corrosion resistance.
Chemical Composition of Stainless Steel 1.4021,420,SUS420J1,2Cr13
| C | Mn | Si | P | S | Ni | Cr | |
|---|---|---|---|---|---|---|---|
| 420J1 | 0.16~0.25 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 12.00~14.00 |
| 420J2 | 0.26~0.35 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 12.00~14.00 |
Applications of 420 Stainless Steel
Stainless steel 420 is suitable for a variety of applications requiring high corrosion resistance. It is not recommended to use it above 800oF (427oC) due to rapid hardening and loss of corrosion resistance. The following applications are made with stainless steel 420:
Shear Blades
Needle Valves
Surgical Equipment
Cutlery
Bearings
Bushings
Fasteners
Screens
Knives (putty knife kitchen knife paring knife nail clippers table knife scissors)
Mobile hard disk
Q&A about 420 Stainless Steel strip - Quality, Price, and Delivery
Which cities and countries export or buy 420 Stainless Steel strip?
We can deliver 420 strips to all major Chinese cities including Wuxi,Foshan. The materials will be delivered directly to your factory. Our stainless steel 420 strips and other products are exported to Vietnam, Thailand, Turkey, Pakistan, South Korea, Singapore, Germany, Brazil, Indonesia, Russia and Egypt.
How to finish stainless steel 420 strips?
We offer stainless steel 420 strips in different types and finish. We can offer stainless steel 420 strips in various types and hardness, such as soft, semi-hard, hard.
How can I get a sample of Stainless Steel 420 Strip?
We only sell high-quality materials from manufacturers in China and abroad. Samples aren't always required. We can provide samples upon request. We can provide custom samples in 5-7 days. Contact us now to receive FREE SAMPLES Customers are responsible for shipping costs.
Can you guarantee the quality of 420 stainless steel strips?
We purchase the stainless steel 420 strip from TISCO,BAOWU,JISCO,TAISHAN,LIANZHONG, POSCO and other steel factories that are reputed and all materials are supplied with mill test reports. Our stainless Steel strip is 100% guaranteed. We will refund your entire purchase price if there are any defects.
What's the best price for 420 stainless steel strips?
We would be delighted to provide you with a quotation. We have the largest stocks and suppliers of stainless steel strips 420 and can offer you the lowest prices. The price we offer is determined by the quantity, material grade and finish. We are happy to give you the best price on stainless steel strips from China. We guarantee the quality of our products, service and pricing.
How long does it take to deliver 420 stainless steel strips?
We have a large stock of stainless steel 420 strips in standard sizes. As soon as payment is received, we can start delivering products. Quality assurance will ensure that the products are delivered as soon as possible. Exports can be delivered within 5-10 working days depending on vessel availability.
Is 420 stainless steel a good material for knives?
This material is good for knives as it's tough, durable and resistant to rust. Its low edge retention does mean that you'll need to use a sharpening device to maintain it.
420 Stainless Steel strip Manufacturers
Top 420 Stainless Steel strip Suppliers and Manufacturers in China
We are China's manufacturer of 420 stainless steel strip. We have over 15000 tonnes of stainless steel strip in our Taiyuan warehouse. We supply stainless steel strip of grades 410,410S,420,420J1,420J2,430,1.4116,1.4034 to all major Chinese cities. Our customers include not only end-users and OEMs, but also traders. We can sell 800 tons of products per day because we are competitive in price. DSM has sold products to more than 50 countries including to Vietnam, Thailand, Turkey, Pakistan, South Korea, Singapore, Germany, Brazil, Indonesia, Russia and Egypt.
Packing - We can place stainless steel Sheets as per your requirements. Normally we have stainless steel Sheets packed on wooden pallets.On special requests from our customers, we can also do custom packing especially for our export customers.
Shearing - DSM has in - house shearing and slitting cutting facilities. We can cut the Sheets to suit your size requirements.
Slitting - We can offer slitting for thickness upto 10mm. Let us know if you have requirements for cutting.
Laser Cutting - Laser cutting is the most expensive, and required for precision engineered parts. Price for stainless steel Sheets can be invoiced separately, and we can separately charge for laser cutting, if the customer accepts the same.
Various Forms - We can offer flat rolled products in various forms such as Sheets, Foils, Rolls, Plain Sheet, s etc.
420 Stainless Steel Specification
| Cold rolled stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Width | 1000mm,1219mm |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | TISCO |
| Standard | GB/T3280-2007 JIS G4305 |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Hot rolled stainless steel coil & sheet | |
| Thickness | 3.0-10.0mm |
| Width | 1219mm |
| Length | coil or as per requirement |
| Surface | No.1,1D |
| Original | TISCO |
| Standard | GB/T4237-2015 JIS G4304 |
| MOQ for coil | 13mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Precision stainless steel strip | |
| Thickness | 0.08-1.2mm |
| Rolling width | 450-680mm |
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | DSM |
| Standard | Produce as per your requirement |
| MOQ | 3mt or as per coil actual weight |
| Re-rolling stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Rolling width | 550-680mm |
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | as per requirement |
| Surface | 2B |
| Standard | Produce as per your requirement |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
Hardness of 420 Stainless Steel
The 420 grade, which contains 12%-14%chrome, is ductile when annealed but can be hardened up to Rockwell Hardness 50HRC. This is the highest Rockwell Hardness of any of the grades. Hardening and polishing can achieve the best corrosion resistance.
Chemical Composition of Stainless Steel 1.4021,420,SUS420J1,2Cr13
| C | Mn | Si | P | S | Ni | Cr | |
|---|---|---|---|---|---|---|---|
| 420J1 | 0.16~0.25 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 12.00~14.00 |
| 420J2 | 0.26~0.35 | 1.00 | 1.00 | 0.040 | 0.030 | 0.60 | 12.00~14.00 |
Applications of 420 Stainless Steel
Stainless steel 420 is suitable for a variety of applications requiring high corrosion resistance. It is not recommended to use it above 800oF (427oC) due to rapid hardening and loss of corrosion resistance. The following applications are made with stainless steel 420:
Shear Blades
Needle Valves
Surgical Equipment
Cutlery
Bearings
Bushings
Fasteners
Screens
Knives (putty knife kitchen knife paring knife nail clippers table knife scissors)
Mobile hard disk
Q&A about 420 Stainless Steel strip - Quality, Price, and Delivery
Which cities and countries export or buy 420 Stainless Steel strip?
We can deliver 420 strips to all major Chinese cities including Wuxi,Foshan. The materials will be delivered directly to your factory. Our stainless steel 420 strips and other products are exported to Vietnam, Thailand, Turkey, Pakistan, South Korea, Singapore, Germany, Brazil, Indonesia, Russia and Egypt.
How to finish stainless steel 420 strips?
We offer stainless steel 420 strips in different types and finish. We can offer stainless steel 420 strips in various types and hardness, such as soft, semi-hard, hard.
How can I get a sample of Stainless Steel 420 Strip?
We only sell high-quality materials from manufacturers in China and abroad. Samples aren't always required. We can provide samples upon request. We can provide custom samples in 5-7 days. Contact us now to receive FREE SAMPLES Customers are responsible for shipping costs.
Can you guarantee the quality of 420 stainless steel strips?
We purchase the stainless steel 420 strip from TISCO,BAOWU,JISCO,TAISHAN,LIANZHONG, POSCO and other steel factories that are reputed and all materials are supplied with mill test reports. Our stainless Steel strip is 100% guaranteed. We will refund your entire purchase price if there are any defects.
What's the best price for 420 stainless steel strips?
We would be delighted to provide you with a quotation. We have the largest stocks and suppliers of stainless steel strips 420 and can offer you the lowest prices. The price we offer is determined by the quantity, material grade and finish. We are happy to give you the best price on stainless steel strips from China. We guarantee the quality of our products, service and pricing.
How long does it take to deliver 420 stainless steel strips?
We have a large stock of stainless steel 420 strips in standard sizes. As soon as payment is received, we can start delivering products. Quality assurance will ensure that the products are delivered as soon as possible. Exports can be delivered within 5-10 working days depending on vessel availability.
Is 420 stainless steel a good material for knives?
This material is good for knives as it's tough, durable and resistant to rust. Its low edge retention does mean that you'll need to use a sharpening device to maintain it.
420 Stainless Steel strip Manufacturers
Top 420 Stainless Steel strip Suppliers and Manufacturers in China
We are China's manufacturer of 420 stainless steel strip. We have over 15000 tonnes of stainless steel strip in our Taiyuan warehouse. We supply stainless steel strip of grades 410,410S,420,420J1,420J2,430,1.4116,1.4034 to all major Chinese cities. Our customers include not only end-users and OEMs, but also traders. We can sell 800 tons of products per day because we are competitive in price. DSM has sold products to more than 50 countries including to Vietnam, Thailand, Turkey, Pakistan, South Korea, Singapore, Germany, Brazil, Indonesia, Russia and Egypt.
Packing - We can place stainless steel Sheets as per your requirements. Normally we have stainless steel Sheets packed on wooden pallets.On special requests from our customers, we can also do custom packing especially for our export customers.
Shearing - DSM has in - house shearing and slitting cutting facilities. We can cut the Sheets to suit your size requirements.
Slitting - We can offer slitting for thickness upto 10mm. Let us know if you have requirements for cutting.
Laser Cutting - Laser cutting is the most expensive, and required for precision engineered parts. Price for stainless steel Sheets can be invoiced separately, and we can separately charge for laser cutting, if the customer accepts the same.
Various Forms - We can offer flat rolled products in various forms such as Sheets, Foils, Rolls, Plain Sheet, s etc.
简体中文 
